top of page
Mount once. Re-route without rebuilding everything.
Built for repeat changes and modular workflows.
Made in small additive-manufactured batches. Minor surface variation may exist.
SPECIFICATIONS Total Mount Length — 129.5 mm Total Mount Width — 24.6 mm Total Closed Height — 18.8 mm Total Open Height — 30 mm Approximate Unit Weight — 31 g INTERNAL STRUCTURE Internal Tray Length — 118.9 mm Internal Tray Width — 19.7 mm Internal Tray Depth — 3 mm Wall Thickness — 2.5 mm TOP PIECE Top Piece Length — 119 mm Top Piece Width — 19.8 mm Top Piece Height — 12.7 mm Locking Tab Width — 11.8 mm Locking Tab Depth — 3.8 mm Lock Engagement Depth — 3.8 mm CABLE MANAGEMENT SYSTEM Total Cable Channels — 9 Individual Cable Channel Diameter — 6.2 mm Channel Opening Width — 5.9 mm Distance Between Channels — 3.1 mm Channel Depth — 19.8 mm Maximum Recommended Cable Diameter — 6.2 mm Recommended Cable Types — USB, Display, Audio, Standard Power Cables MOUNTING SYSTEM Screw Hole Diameter — 2.5 mm Screw Hole Depth — 2 mm Distance Between Mounting Holes — 77.7 mm Adhesive Surface Length — 65 mm Adhesive Surface Width — 20 mm Recommended Tape Thickness — 0.75 mm RECOMMENDED INSTALLATION CLEARANCES Required Underside Clearance — 30 mm minimum Cable Exit Clearance — 50–75 mm recommended Side Clearance Needed for Reconfiguration — 38 mm minimum Minimum Desk Thickness Compatibility — Flat mounting surface required
MATERIALS & MANUFACTURING Material Type — PETG Polyethylene Terephthalate Glycol-modified Manufacturing Method — Additive Manufacturing Print Layer Height — 0.15 mm
INSTALLATIONS Mount Surface Install onto a clean, flat surface underneath desks, workstations, or modular setups. Adhesive Mounting Each unit includes pre-applied 3M adhesive mounting tape. For best results: Install on clean, smooth, non-painted surfaces Press firmly during installation Allow up to 24 hours for full adhesive bond strength ⚠️ Adhesive Warning The included adhesive is NOT recommended for: painted surfaces drywall walls weak laminate finishes Pyrrion Solutions is not responsible for paint or surface damage caused by adhesive removal. Screw Mounting Optional screw mounting is recommended for: permanent installations heavier cable routing setups high-movement environments Use flat head screws only. Raised or rounded screw heads may interfere with proper system fitment. Cable Routing Route cables through the open channel system, then lock the top section into place. The T-7 MACS system supports repeat cable changes without rebuilding the entire setup. Cables can later be: swapped removed reorganized rerouted without uninstalling the full system. Reconfiguration Built for changing setups. Unhook. Adjust. Redeploy. Recommended Setup Conditions Best used on: clean surfaces dry environments flat mounting areas Avoid: textured paint dusty surfaces loose laminate damaged finishes
COMPATIBILITY Designed For The T-7 MACS system is designed for: desk cable management workstation routing PC setups creator setups audio equipment routing modular workspaces Cable Compatibility Supports a wide range of standard cables including: USB cables HDMI DisplayPort Ethernet power cables audio cables peripheral wiring Cable Capacity 9 total cable channels. Maximum recommended cable diameter: 6.2 mm per channel Multiple cable types and mixed routing layouts are supported. Mounting Compatibility Compatible with: wood desks metal desks laminate surfaces most flat underside desk surfaces Can be mounted using: included adhesive flat head screws Modular Workflow Compatibility Designed for setups that frequently change. Ideal for: standing desks modular battlestations creator workstations temporary or evolving cable layouts Clearance Requirements Recommended underside clearance: 30 mm minimum for full reconfiguration access Recommended side clearance: 25 mm minimum for cable removal and rerouting Not Recommended For painted walls drywall mounting textured surfaces outdoor environments extreme heat exposure
WHAT’S INCLUDED 1 Unit Includes 1x T-7 MACS Base Mount 1x T-7 MACS Locking Top Piece Pre-applied 3M mounting adhesive Quick install guide Founder Run packaging materials (First 100 Units) 5 Pack Includes 5x T-7 MACS Systems Pre-applied 3M mounting adhesive on all units Quick install guide Founder Run thank you card QR code access to setup and demo videos 10 Pack Includes 10x T-7 MACS Systems Pre-applied 3M mounting adhesive on all units Quick install guide Founder Run thank you card QR code access to setup and demo videos Additional Notes Each T-7 MACS system includes: 9 cable routing channels reusable modular locking system additive-manufactured construction Minor surface variation may exist due to the manufacturing process. Each unit is tested for real-world functionality before packaging. Mounting Hardware Flat head screws are NOT included.
bottom of page